TAST tool Menu
TAST Adaptors
Adaptors examples
TAST Integrations
Interesting features
Documentation of technical administration
Modeling recommendations
Training in the TAST tool
Sidebar
pdf_adaptor
This is an old revision of the document!
Table of Contents
Host Adaptor 3270
Introduction
This adapter is used to run tests on the Host Adapter 3270. This Adapter is currently under construction, so the information on it is still under construction. Therefore, the information will be updated as the development progresses.
Configuration
In the initialization process, it is necessary to supply the information to connect to the Host 3270 server. That is the information of the Adapter object.
Initialization Parameters
Connection
- Host: Name of the machine or IP address. Required. SESSION_HOST
- Port: Connection port. Required.SESSION_HOST_POST.
- LU_Name: Name of the connection LU, optional.
- Enhanced: Indicates whether the Enhanced protocol is used. (by default is not checked). SESSION_TN_ENHANCED.
- Telnet_Negotiated: The telnet information.
- Server_Authentication: Information of authentication to the 3270 Server.
- Client_Certificate_Autentication: Certificate for Authentication.
- Personal_Certificate: Personal certificate for Authentication.
- Personal_Certificate_File Path: Path to the Certificate for Authentication.
- Personal_Certificate_pass: Pass to the Certificate for Authentication.
- Certificate_Name: Name of the Certificate.
- Certificate_Pass: Pass to the Certificate.
- Certificate_Source: Source to the Certificate.
- Certificate_URL: Url to Certificate.
- Prompt_Required: PromptRequired.
- Certificate_Based_Keys: Certificate Based Keys.
- SSL: SSL.
- KeyStore_FilePath: KeyStore File Path.
- P12_FilePath: P12 File Path.
- KeyStore_Pass: KeyStore Pass.
- Certificate_Trusted: Certificate for Authentication.
- Code_Page: Code Page.
- Session_Type: Session Type.
- Security_Type: Security Type.
- Protocol: Protocol.
- Protocol_Version: Protocol Version.
- Certificate_Type: Certificate Type.
Predefined Functions
- connect3270: Allows you to connect to the 3270. (It is not necessary to create the message, the Adapter executes the connection in its creation).
- disconnect3270: Allows you to disconnect to the 3270.
- play: Plays the navigation 7 execution into the 3270 Host. It’s necessary to record the navigation previously.
- rec: Records the navigation 7 execution into the 3270 Host.
pdf_adaptor.1573142052.txt.gz · Last modified: 2019/11/07 15:54 by montse
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported
