TAST DokuWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Script Generic Adaptor examples ======

{{:TAST-icon.png?nolink&70|}}

====Description====
Through the Script Generic Adaptor, TAST connects to a remote machine and execute commands, doesn’t matter the Operating System. It’s possible to perform single tests with this adaptor or End to end tests connecting with other adaptors either.

====UML Diagram and Mapping====

This is an example of a UML Diagram which uses the Script Generic Adaptor.\\
\\
\\
{{:en:script1.jpg?600|}}\\
\\
\\
This is an example of interactions between the Script Generic Adaptor with other adaptors in an E2E test.
\\
\\
{{:en:script2.jpg?600|}}
\\
\\
As part of the mapping process, you should provide the Adaptor’s information, regarding to connect and use it: 

        * **Host address:** Ip addres of the Host machine.
	* **Username:** User name authorized to access to the Host machine.
	* **Password:** Password of a user authorized to access to the Host machine.
	* **Port:** Port for the Ip addres of the Host machine.
	* **Connection Type:** Type of connection to the Host machine. For example, SSH (Secure connection).

====Test Set Execution====

After the test set execution, immediately you have the results. There are two main elements you can verify.

  * **Logs:** The step by step information of the execution, with 
      *	the results, 
      *	the methods had been executed, 
      *	the timelines.     
  * **Evidences:** The screenshots or evidence information by step, in case they have requested.

TAST DokuWiki

User Tools

Site Tools

Page Tools