Differences

This shows you the differences between two versions of the page.

--- computer_setup_for_tast_use [2021/05/04 12:06]
montse [Configure your device to use it with Appium]
+++ computer_setup_for_tast_use [2025/03/20 17:22] (current)
ale
@@ Line 12: / Line 12: @@
   - Restart the PC.\\
   - Open java options following these steps:\\ a. Click the Windows start button.\\ b. Go to “control panel”.\\ c. Go to “Programs”.\\ d. Click on “Java”.\\ \\
-  -  Add exception on the “Edit Site List” option on the “Security” tab:\\ a. Click on “edit site list”.\\ \\ {{ :es:imagen4.jpg?350 |}}\\ b. Click on “Add”\\ {{ :es:imagen5.jpg?350 |}}\\ c. Add locations:\\ \\ For SIPSA environment:\\ https://app.testautomationsystemtool.com/\\ For TAST1 environment:\\ https://tast-sbg-tast-dev.appls.boaw.paas.gsnetcloud.corp/\\ For TAST2 environment:\\ https://tast-sbg-tast-pre.appls.boaw.paas.gsnetcloud.corp/\\ \\
+  -  Add exception on the “Edit Site List” option on the “Security” tab:\\ a. Click on “edit site list”.\\ \\ {{ :es:imagen4.jpg?350 |}}\\ b. Click on “Add”\\ {{ :es:imagen5.jpg?350 |}}\\ c. Add locations:\\ \\ For SIPSA environment:\\ https://app.testautomationsystemtool.com/\\ For Cloud1 environment:\\ http://app.cloud1.testautomationsystemtool.com/\\ \\
-  - Create a folder named “AppTast” on the “C:” Drive\\ \\ {{ :es:imagen6.jpg?350 |}}\\ \\
+  - Create a folder called ‘AppTast’ in this path ‘C:\UsersYOURUSER’ in case you don't have it created.\\ \\ {{ :es:imagen6.jpg?350 |}}\\ \\
-  - Find drivers of web driver in the following folder:\\ P:\Projektdokumente\CE17.390500-Test Automation System Tool  TAST\Produban Docs.\\ \\ {{ :es:imagen7.jpg?350 |}}\\ \\
+  - Download the drivers from TAST, and put them inside the appTAST folder, in another folder called “seleniumDriver”.\\ \\ {{ :en:seleniumdrivers.jpg?direct&500 |}}\\ \\  At the same time, here you need to separate them into other folders. These folders are called: “chromedriver”, “edgedriver” and “firefoxdriver”, depending on which ones you need.\\ \\
-  - Copy in “C:/AppTast” the folder “seleniumDriver” (no admin rights required).\\ \\
-  - Find the folder “wget” in the following directory:\\ P:\Projektdokumente\CE17.390500-Test Automation System Tool TAST\Produban Docs.\\ \\
-  - Copy in “C:/AppTast” the folder “wget” (no admin  rights required).\\ \\ {{ :es:imagen8.jpg?400 |}}\\ \\
@@ Line 23: / Line 20: @@
 This will be a guide to install and set up the components required to use the Mobile Adaptor with TAST.\\ \\
-**NOTE THAT FOR SOME OF THE SOFTWARE LISTED HERE YOU MAY NEED TO ASK YOUR ADMINISTRATOR TO INSTALL IT FOR YOU**\\ \\
@@ Line 29: / Line 25: @@
   - Go to the Appium Github: https://github.com/appium/appium-desktop/releases\\ \\
-  - In this page, you need to download the latest .exe version that matches with your computer’s operative system. If it is a Windows installation, you need to select Appium-windows-1.15.1.exe in this case (you need to download the latest version which is probably not the same as the screenshot below).\\ \\ {{ :es:imagenmobile1.jpg?500 |}}\\ \\
+  - In this page, you need to download the latest .exe version that matches with your computer’s operative system. If it is a Windows installation, you need to select **Appium-windows-1.21.0-1.exe specifically. You cannot download a newer version**.\\ \\ {{ :en:appium.png?direct&350 |}}\\ \\
-  - When the download finishes, open it.\\ \\ {{ :es:imagenmobile1.1.jpg?150 |}}\\ \\
+  - When the download finishes, open it.\\ \\ {{ :en:appium1.png?direct&300 |}}\\ \\
   - A installer will appear to download the software, choose the most optimal option for you.\\ \\ {{ es:imagenmobile2.jpg?350 |}}\\ \\
   - Wait until the installation is completed.\\ \\ {{ :es:imagenmobile3.jpg?300 |}}\\ \\ Now you have Appium installed.\\ \\
@@ Line 50: / Line 46: @@
   - Select the UI theme you prefer, dark or light. Click on “Next”.\\ \\ {{ :es:imagenmobile13.jpg?300 |}}\\ \\
   - Click on “Finish” to start downloading the components.\\ \\ {{ :es:imagenmobile14.jpg?350 |}}\\ \\
-  - After everything is downloaded, click on “Finish” again.\\ \\ {{ :es:imagenmobile15.jpg?350 |}}\\ \\  Now all components are installed, and we can proceed with the set up of the emulator.\\  **NOTE: You may need to have your BIOS modified by your administrator to be able to use the emulator, but you need to follow these steps for the Adaptor to work nonetheless**.\\
+  - After everything is downloaded, click on “Finish” again.\\ \\ {{ :es:imagenmobile15.jpg?350 |}}\\ \\  Now all components are installed, and we can proceed with the set up of the emulator.\\ \\ **NOTE: You may need to have your BIOS modified by your administrator to be able to use the emulator, but you need to follow these steps for the Adaptor to work nonetheless**.\\
   - Click on “Create New Project”.\\ \\ {{ :es:imagenmobile15.1.jpg?350 |}}\\ \\
@@ Line 109: / Line 105: @@
   - Click en “Start Server”.\\ \\ {{ :es:imagenmobile32.jpg?250 |}}\\ \\
   - Then click on the magnifying glass (marked in red in the image).\\ \\ {{ :es:imagenmobile33.jpg?250 |}}\\ \\
-  - A new window will pop up. We need to click on “Desired capabilities” and in the JSON Representation something like this:\\ \\ {\\ "deviceName": "YourPhoneModel",\\ "platformName": "Android",\\ "platformVersion": "x.x",\\ "udid": "the id you retrieved before"\\ }\\ \\ **DeviceName** is the name you want to put to your device, we recommend to put the model of your phone (like Samsung Galaxy s10).\\ **PlatformName** will be the type of OS, in almost all the cases will be Android.\\ **PlatformVersion** is the version the device OS.\\ And the **udid** is the ID we got from the adb.exe.\\ \\ {{ :es:imagenmobile34.jpg?300 |}}\\ \\
+  - A new window will pop up. We need to click on “Desired capabilities” and in the JSON Representation something like this:\\ \\ {\\ "deviceName": "YourPhoneModel",\\ "platformName": "Android",\\ "platformVersion": "x.x",\\ "udid": "the id you retrieved before"\\ }\\ \\ **DeviceName** is the name you want to put to your device, we recommend to put the model of your phone (like Samsung Galaxy s10).\\ **PlatformName** will be the type of OS, in almost all the cases will be Android.\\ **PlatformVersion** is the version the device OS.\\ And the **udid** is the ID we got from the adb.exe.\\ \\ {{ :es:imagenmobile34.jpg?300 |}}\\ \\ \\ \\ {{ :es:imagenmobile34.jpg?300 |}}\\ \\
   - When you have completed this step, click the small save button highlighted in yellow in the image to save the JSON code. Then click on “Save As…” to save the device configuration. We recommend to type the same name you put on “deviceName” in the JSON code.\\ \\
   - Now click on “Automatic Server” on the top left and use the “Saved capability set” you just saved and press “Start Session”.\\ \\ {{ :es:imagenmobile35.jpg?300 |}}\\ \\
@@ Line 115: / Line 111: @@
-=====Guía para Adaptador de Host de TAST (3270/5250)=====
+=====Guide for TAST Host Adaptor (3270/5250)=====
-Esto va a ser una guía para obtener y configurar los componentes necesarios para ejecutar el adaptador 3270 y el adaptador 5250 con TAST.
+This Will be a guide to obtain and set up the necessary components to execute the 3270 and 5250 adapter with TAST.
-  - Ve a la ruta “M:\PLM\10 TAST” y de ahí, descarga la carpeta “tk4-_v1.00_current”, y los archivos “jagacy3270-5.4.0.jar” y “tn5250j-0.7.6-TAST.jar”.\\ \\
+  - Go to the directory “M:\PLM\10 TAST” and locate the folder “tk4-_v1.00_current”, and the files “jagacy3270-5.4.0.jar” and “tn5250j-0.7.6-TAST.jar”.\\ \\
-  - Coge estos archivos y cópialos a tu carpeta “C:\AppTast”.\\ \\
+  - Download these files and copy them to your “C:\AppTast” folder.\\ \\
-  - Una vez hecho esto, para ejecutar el adaptador 3270, hay que ejecutar el “mvs.bat” que hay dentro de la carpeta “tk4-_v1.00_current” por __cada vez que se quiera ejecutar un diagrama__. Es decir, se abre, se ejecuta un diagrama, y para ejecutar otro, se cierra y se vuelve a abrir antes de ejecutarlo.\\ \\
+  - Once this is done, to execute the 3270 adapter you need to execute the  “mvs.bat” located inside the “tk4-_v1.00_current” folder for __each time you want to execute a test__. You open it, execute a diagram, and to be able to execute another one, you need to close it and open it again before doing so.\\ \\
-  - Para ejecutar con el adaptador 5250, primero hay que configurar la conexión. Para esto, si quieres hacer pruebas contra algún servidor, se puede usar pub400.com. Esto será usado en el diagrama también. Hay que crearse una cuenta, y llegarán dos correos, primero uno en el que hay que hacer click en el link, y luego otro con tu usuario y tu contraseña.\\ \\
+  - To execute tests with the 5250 adapter, first we need to set up the connection. If you want to test against any server, you can use pub400.com. You need to make an account, and you will receive two e-mails, one where you need to click the link, and another one with your user and password.\\ \\
-  - Al abrir el tn5250j te encontrarás con la siguiente pantalla, y habrá que hacer click en “add”:\\ \\ {{ :es:imagen5250.1.jpg?350 |}}\\ \\
+  - When opening the tn5250j the following window will pop up, and you will need to click on “add”:\\ \\ {{ :es:imagen5250.1.jpg?350 |}}\\ \\
-  - Aquí se abrirá una nueva ventana para configurar una conexión, se pone el nombre que se quiera, y después hay que ir a TCP/IP.\\ \\ {{ :es:imagen5250.2.jpg?350 |}}\\ \\
+  - A new window will pop up to set up a new connection, you can name it however you want, and go to the TCP/IP tab.\\ \\ {{ :es:imagen5250.2.jpg?350 |}}\\ \\
-  - Aquí es donde vamos a poner la dirección de nuestro host, en este caso pub400.com, si necesitas otro deberás conocer cuál es de antemano. En el device name se pone lo que se quiera, también se puede marcar el “Use PC name as device”.\\ \\ {{ :es:imagen5250.3.jpg?350 |}}\\ \\ Una vez hecho esto, ya está configurado, y se pueden empezar a ejecutar casos desde el cliente de TAST.
+  - Here is where we will type the host IP, in our case, pub400.com. If you need another one, you will need to know it beforehand. This will also be used on the diagram. On the “device name” you can name it however you want, or use the “Use PC name as device” checkbox.\\ \\ {{ :es:imagen5250.3.jpg?350 |}}\\ \\ Once this is done, its already set up and you can start executing cases from the TAST client.
-=====Complementos de TAST para funcionalidad Web=====
+=====TAST Complement for Web Functionality=====
-Por favor haz click en el siguiente link para la guía de instalación, configuración, y cómo usar la funcionalidad de Selective Mapping, útil para el mapeo de mensajes de diagramas. Esto es opcional:\\ \\ [[
+Please click on the following link for the installation, set up guide and how to use the Selective Mapping functionality, helpful when mapping  messages from diagrams. This is optional:\\ \\
-https://wiki.testautomationsystemtool.com/doku.php?id=es:modeling#selective_mapping]]
+[[https://wiki.testautomationsystemtool.com/doku.php?id=modeling#selective_mapping]]
-=====Utilidad para Mapeo de Diagramas en TAST=====
+=====Utility for Diagram Mapping in TAST=====
-Para la guía de instalación, configuración y como usar la función de Record & Playback para TAST, que hace el proceso de mapear los pasos de un diagrama existente más fácil, haz click en el siguiente link. Esto es opcional:\\ \\  [[https://wiki.testautomationsystemtool.com/doku.php?id=es:record_playback]]
+For the installation, set up and guide on how to use the Record & Playback for TAST, which makes the process of mapping the steps of an existing diagram easier, click on the following link. This is optional:\\ \\
+[[https://wiki.testautomationsystemtool.com/doku.php?id=record_playback]]
-=====Guía para Notepad++ con logs con colores=====
-Esto es una guía para instalar Notepad++ y poder ver logs de TAST con diferentes colores. Por favor sigue estos pasos:\\
+=====Guide for Notepad++ with colored logs=====
-  - Descarga la última versión Portable (zip) de Notepad++ del siguiente link: [[https://notepad-plus-plus.org/downloads/]]. Para 32 bits si tu Sistema es de 32 bits, y 64 si tu sistema es de 64.\\ \\ {{ :es:imagennotepad1.jpg?350 |}}\\ \\
-  - Descarga el fichero TASTLOGTEST.xml de este directorio:\\ M:\PLM\16 TMO\60. Modeling\01. TAST\\ \\
-  - Abre Notepad++ y ve a Lenguaje -> Lenguaje definido por el usuario -> Define tu lenguaje.\\ \\ {{ :es:imagennotepad2.jpg?350 |}}\\ \\
-  - Click en “Import” y elige el fichero TASTLOGTEST.xml que acabas de descargar.\\ \\ {{ :es:imagennotepad3.jpg?350 |}}\\ \\
-  - Click en “Guardar como…” y llámalo como quieras, por ejemplo, TASTLanguage, o TAST.\\ \\ {{ :es:imagennotepad4.jpg?350 |}}\\ \\ Ahora, cada vez que abras un archivo .log, puedes ir a “Lenguaje” y elegir el que has definido, que está abajo del todo, y el fichero .log tendrá palabras importantes en colores. Si quieres añadir más palabras, puedes editarlo con la misma ruta anterior: Lenguaje -> Lenguaje definido por el usuario -> Define tu lenguaje.
+This will be a guide to install Notepad++ to be able to see TAST logs with different colors. Please follow the following steps:\\
+  - Download the latest release of the Portable (zip) version of Notepad++ from the following link: [[https://notepad-plus-plus.org/downloads/]]. For 32 bits if your system is 32 bits, and 64 if your system is 64.\\ \\ {{ :es:imagennotepad1.jpg?350 |}}\\ \\
+  - The language can be downloaded from this link: https://www.sipsa.net/wp-content/uploads/2021/10/tastxml-2.zip\\ \\
+  - Open Notepad++ and go to Language -> User Defined Language -> Define your language.\\ \\ {{ :es:imagennotepad2.jpg?350 |}}\\ \\
+  - Press “Import” and choose the “TASTLOGTEST.xml” file you just downloaded.\\ \\ {{ :es:imagennotepad3.jpg?350 |}}\\ \\
+  - Press “Save as…” and name it with the name you want, for example, TASTLanguage, or TAST. \\ \\ {{ :es:imagennotepad4.jpg?350 |}}\\ \\ Now, whenever you open a .log file, you can go to Language and choose the name you just saved at the bottom, and the log file will be have important words colored. If you want to add more words, you can edit it with the same previous route: Language -> User Defined Language -> Define your language.
-=====Procedimiento de Seguridad=====
-Para continuar con el procedimiento de seguridad, el siguiente documento muestra una guía paso a paso.
-{{:manual_security_certificate_alm-160_.docx|}}
-{{:en:tast_release_notes_v1.3.pdf|}}
-For going on with the security allowance procedure, the document below shows a step-by-step guideline.
-{{:manual_security_certificate_alm-160_.docx|}}

TAST DokuWiki

User Tools

Site Tools

Differences

Page Tools