====== Host Adaptor examples ======


=====Description=====
Through the Host Adaptor, TAST connects with a 3270 Host to perform tests into it. It’s possible to perform single tests with this adaptor or end to end tests connecting with other adaptors either.

=====UML Diagram and Mapping=====
This is an example of a UML Diagram which uses the Host Adaptor.\\
\\
\\
{{:en:host_adaptor1.jpg?600|}}\\
\\
This is an example of interactions between the 3270 Host Adaptor with other adaptors in an E2E test.
\\
\\
{{:en:host_adaptor2.jpg?600|}}\\
\\
\\
As part of the mapping process, you should provide the Adaptor’s information, regarding to connect and use it:

  * **Host:** Name of the machine or IP address. Required. SESSION_HOST.
  * **Port:** Connection port. Required.SESSION_HOST_POST.
  * **LU Name:** Name of the connection LU, optional.  
  * **Enhanced:** Indicates whether the Enhanced protocol is used. (by default is not checked). SESSION_TN_ENHANCED. 
  * **Telnet_Negotiated:** The telnet information. 
  * **Server Authentication:** Information of authentication to the 3270 Server. 
  * **Client_Certificate_Autentication:** Certificate for Authentication.
  * **Personal Certification:** Personal certificate for Authentication.
  * **Personal Certificate File Path:** Path to the Certificate for Authentication.
  * **Personal Certificate pass:** Pass to the Certificate for Authentication.
  * **Certificate Name:** Name of the Certificate.
  * **Certificate Pass:** Pass to the Certificate.
  * **Certificate Source:** Source to the Certificate.
  * **Certificate URL:** Url to Certificate.
  * **Prompt_Required:** PromptRequired.
  * **Certificate_Based_Keys:** Certificate Based Keys.
  * **SSL:** SSL. 
  * **KeyStore_FilePath:** KeyStore File Path:. 
  * **P12_FilePath:** P12 File Path. 
  * **KeyStore_Pass:** KeyStore Pass. 
  * **Certificate_Trusted:** Certificate for Authentication.
  * **Code_Page:** Code Page.  
  * **Session_Type:** Session Type.
  * **Security_Type:** Security Type.
  * **Protocol:** Protocol.
  * **Protocol_Version:** Protocol Version.
  * **Certificate Type:** Certificate Type.









=====Test Set Execution=====

After the test set execution, immediately you have the results. There are two main elements you can verify:

  * **Logs:** The step by step information of the execution, with: 
      *	the results. 
      *	the methods had been executed. 
      *	the timelines.     
  * **Evidences:** The screenshots or evidence information by step, in case they have requested.